add garage node dump-table command for debugging purpose

.woodpecker/debug.yaml

@@ -1,6 +1,3 @@
-labels:
-  nix: "enabled"
-
 when:
   event:
   - push
@@ -12,32 +9,32 @@ when:
 
 steps:
   - name: check formatting
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
-      - nix-build -j4 --attr flakePackages.fmt
+      - nix-shell --attr devShell --run "cargo fmt -- --check"
 
   - name: build
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
       - nix-build -j4 --attr flakePackages.dev
 
   - name: unit + func tests (lmdb)
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
       - nix-build -j4 --attr flakePackages.tests-lmdb
 
   - name: unit + func tests (sqlite)
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
       - nix-build -j4 --attr flakePackages.tests-sqlite
 
   - name: unit + func tests (fjall)
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
       - nix-build -j4 --attr flakePackages.tests-fjall
 
   - name: integration tests
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
       - nix-build -j4 --attr flakePackages.dev
       - nix-shell --attr ci --run ./script/test-smoke.sh || (cat /tmp/garage.log; false)

.woodpecker/publish.yaml

@@ -1,6 +1,3 @@
-labels:
-  nix: "enabled"
-
 when:
   event:
   - deployment
@@ -11,7 +8,7 @@ depends_on:
 
 steps:
   - name: refresh-index
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     environment:
       AWS_ACCESS_KEY_ID:
         from_secret: garagehq_aws_access_key_id
@@ -22,7 +19,7 @@ steps:
       - nix-shell --attr ci --run "refresh_index"
 
   - name: multiarch-docker
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     environment:
       DOCKER_AUTH:
         from_secret: docker_auth

.woodpecker/release.yaml

@@ -1,6 +1,3 @@
-labels:
-  nix: "enabled"
-
 when:
   event:
   - deployment
@@ -19,17 +16,17 @@ matrix:
 
 steps:
   - name: build
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
       - nix-build --attr releasePackages.${ARCH} --argstr git_version ${CI_COMMIT_TAG:-$CI_COMMIT_SHA}
 
   - name: check is static binary
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
       - nix-shell --attr ci --run "./script/not-dynamic.sh result/bin/garage"
 
   - name: integration tests
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
       - nix-shell --attr ci --run ./script/test-smoke.sh || (cat /tmp/garage.log; false)
     when:
@@ -39,7 +36,7 @@ steps:
           ARCH: i386
 
   - name: upgrade tests
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     commands:
       - nix-shell --attr ci --run "./script/test-upgrade.sh v0.8.4 x86_64-unknown-linux-musl" || (cat /tmp/garage.log; false)
     when:
@@ -47,7 +44,7 @@ steps:
           ARCH: amd64
 
   - name: push static binary
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     environment:
       TARGET: "${TARGET}"
       AWS_ACCESS_KEY_ID:
@@ -58,7 +55,7 @@ steps:
       - nix-shell --attr ci --run "to_s3"
 
   - name: docker build and publish
-    image: nixpkgs/nix:nixos-24.05
+    image: nixpkgs/nix:nixos-22.05
     environment:
       DOCKER_PLATFORM: "linux/${ARCH}"
       CONTAINER_NAME: "dxflrs/${ARCH}_garage"

Cargo.toml

@@ -24,18 +24,18 @@ default-members = ["src/garage"]
 
 # Internal Garage crates
 format_table = { version = "0.1.1", path = "src/format-table" }
-garage_api_common = { version = "1.3.1", path = "src/api/common" }
+garage_api_common = { version = "1.2.0", path = "src/api/common" }
-garage_api_admin = { version = "1.3.1", path = "src/api/admin" }
+garage_api_admin = { version = "1.2.0", path = "src/api/admin" }
-garage_api_s3 = { version = "1.3.1", path = "src/api/s3" }
+garage_api_s3 = { version = "1.2.0", path = "src/api/s3" }
-garage_api_k2v = { version = "1.3.1", path = "src/api/k2v" }
+garage_api_k2v = { version = "1.2.0", path = "src/api/k2v" }
-garage_block = { version = "1.3.1", path = "src/block" }
+garage_block = { version = "1.2.0", path = "src/block" }
-garage_db = { version = "1.3.1", path = "src/db", default-features = false }
+garage_db = { version = "1.2.0", path = "src/db", default-features = false }
-garage_model = { version = "1.3.1", path = "src/model", default-features = false }
+garage_model = { version = "1.2.0", path = "src/model", default-features = false }
-garage_net = { version = "1.3.1", path = "src/net" }
+garage_net = { version = "1.2.0", path = "src/net" }
-garage_rpc = { version = "1.3.1", path = "src/rpc" }
+garage_rpc = { version = "1.2.0", path = "src/rpc" }
-garage_table = { version = "1.3.1", path = "src/table" }
+garage_table = { version = "1.2.0", path = "src/table" }
-garage_util = { version = "1.3.1", path = "src/util" }
+garage_util = { version = "1.2.0", path = "src/util" }
-garage_web = { version = "1.3.1", path = "src/web" }
+garage_web = { version = "1.2.0", path = "src/web" }
 k2v-client = { version = "0.0.4", path = "src/k2v-client" }
 
 # External crates from crates.io
@@ -52,11 +52,11 @@ chrono = "0.4"
 crc32fast = "1.4"
 crc32c = "0.6"
 crypto-common = "0.1"
+err-derive = "0.3"
 gethostname = "0.4"
 git-version = "0.3.4"
 hex = "0.4"
 hexdump = "0.1"
-html-escape = "0.2.13"
 hmac = "0.12"
 itertools = "0.12"
 ipnet = "2.9.0"
@@ -88,9 +88,9 @@ tracing-journald = "0.3.1"
 tracing-subscriber = { version = "0.3", features = ["env-filter"] }
 
 heed = { version = "0.11", default-features = false, features = ["lmdb"] }
-rusqlite = "0.37"
+rusqlite = "0.31.0"
 r2d2 = "0.8"
-r2d2_sqlite = "0.31"
+r2d2_sqlite = "0.24"
 fjall = "2.4"
 
 async-compression = { version = "0.4", features = ["tokio", "zstd"] }
@@ -137,7 +137,7 @@ prometheus = "0.13"
 aws-sigv4 = { version = "1.1", default-features = false }
 hyper-rustls = { version = "0.26", default-features = false, features = ["http1", "http2", "ring", "rustls-native-certs"] }
 log = "0.4"
-thiserror = "2.0"
+thiserror = "1.0"
 
 # ---- used only as build / dev dependencies ----
 assert-json-diff = "2.0"
@@ -147,8 +147,12 @@ aws-smithy-runtime = { version = "1.8", default-features = false, features = ["t
 aws-sdk-config = { version = "1.62", default-features = false }
 aws-sdk-s3 = { version = "1.79", default-features = false, features = ["rt-tokio"] }
 
+[profile.dev]
+#lto = "thin"	# disabled for now, adds 2-4 min to each CI build
+lto = "off"
+
 [profile.release]
-lto = "thin"
+lto = true
-codegen-units = 16
+codegen-units = 1
-opt-level = 3
+opt-level = "s"
-strip = "debuginfo"
+strip = true

doc/book/connect/backup.md

@@ -161,49 +161,3 @@ kopia repository validate-provider
 
 You can then run all the standard kopia commands: `kopia snapshot create`, `kopia mount`...
 Everything should work out-of-the-box.
-
-## Plakar
-
-Create your key and bucket on Garage server:
-
-```bash
-garage key create my-plakar-key
-garage bucket create plakar-backups
-garage bucket allow plakar-backups --read --write --key my-plakar-key
-…
-```
-
-On Plakar server, add your Garage as a storage location:
-```bash
-plakar store add garageS3 s3://my-garage.tld/plakar-backups \
-region=garage # Or as you've specified in garage.toml \
-access_key=<Key ID from "garage key info my-plakar-key"> \
-secret_access_key=<Secret key from "garage key info my-plakar-key">
-```
-
-Then create the repository.
-```bash
-plakar at @garageS3 create -plaintext # Unencrypted
-# or
-plakar at @garageS3 create #encrypted
-```
-
-If you encrypt your backups (Plakar default), you will need to define a strong passphrase. Do not forget to save your password safely. It will be needed to decrypt your backups.
-
-
-After the repository has been created, check that everything works as expected (that might give an empty result as no file has been added yet, but no error message):
-```bash
-plakar at @garageS3 check
-```
-
-Now that everything is configure, you can use Garage as your backups storage. For instance sync it with a local backup storage:
-```bash
-$ plakar at ~/backups sync to @garageS3
-```
-
-Or list the S3 storage content:
-```bash
-$ plakar at @garageS3 ls
-```
-
-More information in Plakar documentation: https://www.plakar.io/docs/main/quickstart/

doc/book/cookbook/binary-packages.md

@@ -15,10 +15,9 @@ Alpine Linux repositories (available since v3.17):
 apk add garage
 ```
 
-The default configuration file is installed to `/etc/garage/garage.toml`. You can run
+The default configuration file is installed to `/etc/garage.toml`. You can run
-Garage using: `rc-service garage start`.
+Garage using: `rc-service garage start`. If you don't specify `rpc_secret`, it
-
+will be automatically replaced with a random string on the first start.
-If you don't specify `rpc_secret`, it will be automatically replaced with a random string on the first start.
 
 Please note that this package is built without Consul discovery, Kubernetes
 discovery, OpenTelemetry exporter, and K2V features (K2V will be enabled once
@@ -27,7 +26,7 @@ it's stable).
 
 ## Arch Linux
 
-Garage is available in the official repositories under [extra](https://archlinux.org/packages/extra/x86_64/garage).
+Garage is available in the [AUR](https://aur.archlinux.org/packages/garage).
 
 ## FreeBSD
 

doc/book/cookbook/kubernetes.md

@@ -11,7 +11,7 @@ Firstly clone the repository:
 
 ```bash
 git clone https://git.deuxfleurs.fr/Deuxfleurs/garage
-cd garage/script/helm
+cd garage/scripts/helm
 ```
 
 Deploy with default options:

doc/book/cookbook/real-world.md

@@ -96,14 +96,14 @@ to store 2 TB of data in total.
 ## Get a Docker image
 
 Our docker image is currently named `dxflrs/garage` and is stored on the [Docker Hub](https://hub.docker.com/r/dxflrs/garage/tags?page=1&ordering=last_updated).
-We encourage you to use a fixed tag (eg. `v1.3.0`) and not the `latest` tag.
+We encourage you to use a fixed tag (eg. `v1.2.0`) and not the `latest` tag.
-For this example, we will use the latest published version at the time of the writing which is `v1.3.0` but it's up to you
+For this example, we will use the latest published version at the time of the writing which is `v1.2.0` but it's up to you
 to check [the most recent versions on the Docker Hub](https://hub.docker.com/r/dxflrs/garage/tags?page=1&ordering=last_updated).
 
 For example:
 
 ```
-sudo docker pull dxflrs/garage:v1.3.0
+sudo docker pull dxflrs/garage:v1.2.0
 ```
 
 ## Deploying and configuring Garage
@@ -171,7 +171,7 @@ docker run \
   -v /etc/garage.toml:/etc/garage.toml \
   -v /var/lib/garage/meta:/var/lib/garage/meta \
   -v /var/lib/garage/data:/var/lib/garage/data \
-  dxflrs/garage:v1.3.0
+  dxflrs/garage:v1.2.0
 ```
 
 With this command line, Garage should be started automatically at each boot.
@@ -185,7 +185,7 @@ If you want to use `docker-compose`, you may use the following `docker-compose.y
 version: "3"
 services:
   garage:
-    image: dxflrs/garage:v1.3.0
+    image: dxflrs/garage:v1.2.0
     network_mode: "host"
     restart: unless-stopped
     volumes:

doc/book/quick-start/_index.md

@@ -132,7 +132,7 @@ docker run \
   -v /path/to/garage.toml:/etc/garage.toml \
   -v /path/to/garage/meta:/var/lib/garage/meta \
   -v /path/to/garage/data:/var/lib/garage/data \
-  dxflrs/garage:v1.3.0
+  dxflrs/garage:v1.2.0
 ```
 
 Under Linux, you can substitute `--network host` for `-p 3900:3900 -p 3901:3901 -p 3902:3902 -p 3903:3903`

doc/book/reference-manual/configuration.md

@@ -24,8 +24,7 @@ db_engine = "lmdb"
 
 block_size = "1M"
 block_ram_buffer_max = "256MiB"
-block_max_concurrent_reads = 16
+
-block_max_concurrent_writes_per_request =10
 lmdb_map_size = "1T"
 
 compression_level = 1
@@ -97,9 +96,7 @@ The following gives details about each available configuration option.
 Top-level configuration options, in alphabetical order:
 [`allow_punycode`](#allow_punycode),
 [`allow_world_readable_secrets`](#allow_world_readable_secrets),
-[`block_max_concurrent_reads`](`block_max_concurrent_reads),
 [`block_ram_buffer_max`](#block_ram_buffer_max),
-[`block_max_concurrent_writes_per_request`](#block_max_concurrent_writes_per_request),
 [`block_size`](#block_size),
 [`bootstrap_peers`](#bootstrap_peers),
 [`compression_level`](#compression_level),
@@ -525,37 +522,6 @@ node.
 
 The default value is 256MiB.
 
-#### `block_max_concurrent_reads` (since `v1.3.0` / `v2.1.0`) {#block_max_concurrent_reads}
-
-The maximum number of blocks (individual files in the data directory) open
-simultaneously for reading.
-
-Reducing this number does not limit the number of data blocks that can be
-transferred through the network simultaneously. This mechanism was just added
-as a backpressure mechanism for HDD read speed: it helps avoid a situation
-where too many requests are coming in and Garage is reading too many block
-files simultaneously, thus not making timely progress on any of the reads.
-
-When a request to read a data block comes in through the network, the requests
-awaits for one of the `block_max_concurrent_reads` slots to be available
-(internally implemented using a Semaphore object). Once it acquired a read
-slot, it reads the entire block file to RAM and frees the slot as soon as the
-block file is finished reading. Only after the slot is released will the
-block's data start being transferred over the network.  If the request fails to
-acquire a reading slot wihtin 15 seconds, it fails with a timeout error.
-Timeout events can be monitored through the `block_read_semaphore_timeouts`
-metric in Prometheus: a non-zero number of such events indicates an I/O
-bottleneck on HDD read speed.
-
-
-#### `block_max_concurrent_writes_per_request` (since  `v2.1.0`) {#block_max_concurrent_writes_per_request}
-
-This parameter is designed to adapt to the concurrent write performance of 
-different storage media.Maximum number of parallel block writes per put request 
-Higher values improve throughput but increase memory usage.
-
-Default: 3, Recommended: 10-30 for NVMe, 3-10 for HDD
-
 #### `lmdb_map_size` {#lmdb_map_size}
 
 This parameters can be used to set the map size used by LMDB,

doc/book/reference-manual/s3-compatibility.md

@@ -27,7 +27,7 @@ Feel free to open a PR to suggest fixes this table. Minio is missing because the
 
 | Feature                      | Garage                           | [Openstack Swift](https://docs.openstack.org/swift/latest/s3_compat.html) | [Ceph Object Gateway](https://docs.ceph.com/en/latest/radosgw/s3/) | [Riak CS](https://docs.riak.com/riak/cs/2.1.1/references/apis/storage/s3/index.html) | [OpenIO](https://docs.openio.io/latest/source/arch-design/s3_compliancy.html) |
 |------------------------------|----------------------------------|-----------------|---------------|---------|-----|
-| [signature v2](https://docs.aws.amazon.com/AmazonS3/latest/API/Appendix-Sigv2.html) (deprecated) | ❌ Missing | ✅ |  ✅ | ✅ | ✅ |
+| [signature v2](https://docs.aws.amazon.com/general/latest/gr/signature-version-2.html) (deprecated) | ❌ Missing | ✅ |  ✅ | ✅ | ✅ |
 | [signature v4](https://docs.aws.amazon.com/AmazonS3/latest/API/sig-v4-authenticating-requests.html) |  ✅ Implemented |  ✅ |  ✅ | ❌ | ✅ |
 | [URL path-style](https://docs.aws.amazon.com/AmazonS3/latest/userguide/VirtualHosting.html#path-style-access) (eg. `host.tld/bucket/key`) |  ✅ Implemented | ✅ |  ✅ | ❓| ✅ |
 | [URL vhost-style](https://docs.aws.amazon.com/AmazonS3/latest/userguide/VirtualHosting.html#virtual-hosted-style-access) URL (eg. `bucket.host.tld/key`) |  ✅ Implemented | ❌| ✅| ✅ | ✅ |

doc/drafts/admin-api.md

@@ -70,7 +70,7 @@ Example response body:
 ```json
 {
   "node": "b10c110e4e854e5aa3f4637681befac755154b20059ec163254ddbfae86b09df",
-  "garageVersion": "v1.3.0",
+  "garageVersion": "v1.2.0",
   "garageFeatures": [
     "k2v",
     "lmdb",

flake.lock

@@ -50,17 +50,17 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1763977559,
+        "lastModified": 1736692550,
-        "narHash": "sha256-g4MKqsIRy5yJwEsI+fYODqLUnAqIY4kZai0nldAP6EM=",
+        "narHash": "sha256-7tk8xH+g0sJkKLTJFOxphJxxOjMDFMWv24nXslaU2ro=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "cfe2c7d5b5d3032862254e68c37a6576b633d632",
+        "rev": "7c4869c47090dd7f9f1bdfb49a22aea026996815",
         "type": "github"
       },
       "original": {
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "cfe2c7d5b5d3032862254e68c37a6576b633d632",
+        "rev": "7c4869c47090dd7f9f1bdfb49a22aea026996815",
         "type": "github"
       }
     },
@@ -80,17 +80,17 @@
         ]
       },
       "locked": {
-        "lastModified": 1763952169,
+        "lastModified": 1738549608,
-        "narHash": "sha256-+PeDBD8P+NKauH+w7eO/QWCIp8Cx4mCfWnh9sJmy9CM=",
+        "narHash": "sha256-GdyT9QEUSx5k/n8kILuNy83vxxdyUfJ8jL5mMpQZWfw=",
         "owner": "oxalica",
         "repo": "rust-overlay",
-        "rev": "ab726555a9a72e6dc80649809147823a813fa95b",
+        "rev": "35c6f8c4352f995ecd53896200769f80a3e8f22d",
         "type": "github"
       },
       "original": {
         "owner": "oxalica",
         "repo": "rust-overlay",
-        "rev": "ab726555a9a72e6dc80649809147823a813fa95b",
+        "rev": "35c6f8c4352f995ecd53896200769f80a3e8f22d",
         "type": "github"
       }
     },

flake.nix

@@ -2,13 +2,13 @@
   description =
     "Garage, an S3-compatible distributed object store for self-hosted deployments";
 
-  # Nixpkgs 25.05 as of 2025-11-24
+  # Nixpkgs 24.11 as of 2025-01-12
   inputs.nixpkgs.url =
-    "github:NixOS/nixpkgs/cfe2c7d5b5d3032862254e68c37a6576b633d632";
+    "github:NixOS/nixpkgs/7c4869c47090dd7f9f1bdfb49a22aea026996815";
 
-  # Rust overlay as of 2025-11-24
+  # Rust overlay as of 2025-02-03
   inputs.rust-overlay.url =
-  "github:oxalica/rust-overlay/ab726555a9a72e6dc80649809147823a813fa95b";
+  "github:oxalica/rust-overlay/35c6f8c4352f995ecd53896200769f80a3e8f22d";
   inputs.rust-overlay.inputs.nixpkgs.follows = "nixpkgs";
 
   inputs.crane.url = "github:ipetkov/crane";
@@ -30,10 +30,6 @@
           inherit system nixpkgs crane rust-overlay extraTestEnv;
           release = false;
         }).garage-test;
-        lints = (compile {
-          inherit system nixpkgs crane rust-overlay;
-          release = false;
-        });
       in
       {
         packages = {
@@ -60,10 +56,6 @@
           tests-fjall = testWith {
             GARAGE_TEST_INTEGRATION_DB_ENGINE = "fjall";
           };
-
-          # lints (fmt, clippy)
-          fmt = lints.garage-cargo-fmt;
-          clippy = lints.garage-cargo-clippy;
         };
 
         # ---- developpment shell, for making native builds only ----

nix/compile.nix

@@ -48,7 +48,7 @@ let
 
   inherit (pkgs) lib stdenv;
 
-  toolchainFn = (p: p.rust-bin.stable."1.91.0".default.override {
+  toolchainFn = (p: p.rust-bin.stable."1.82.0".default.override {
     targets = lib.optionals (target != null) [ rustTarget ];
     extensions = [
       "rust-src"
@@ -190,15 +190,4 @@ in rec {
       pkgs.cacert
     ];
   } // extraTestEnv);
-
-  # ---- source code linting ----
-
-  garage-cargo-fmt = craneLib.cargoFmt (commonArgs // {
-    cargoExtraArgs = "";
-  });
-
-  garage-cargo-clippy = craneLib.cargoClippy (commonArgs // {
-    cargoArtifacts = garage-deps;
-    cargoClippyExtraArgs = "--all-targets -- -D warnings";
-  });
 }

script/dev-env-aws.sh

@@ -1,7 +1,6 @@
 export AWS_ACCESS_KEY_ID=`cat /tmp/garage.s3 |cut -d' ' -f1`
 export AWS_SECRET_ACCESS_KEY=`cat /tmp/garage.s3 |cut -d' ' -f2`
 export AWS_DEFAULT_REGION='garage'
-export AWS_REQUEST_CHECKSUM_CALCULATION='when_required'
 # FUTUREWORK: set AWS_ENDPOINT_URL instead, once nixpkgs bumps awscli to >=2.13.0.
 function aws { command aws --endpoint-url http://127.0.0.1:3911 $@ ; }
 

script/helm/garage/Chart.yaml

@@ -2,8 +2,8 @@ apiVersion: v2
 name: garage
 description: S3-compatible object store for small self-hosted geo-distributed deployments
 type: application
-version: 0.7.3
+version: 0.7.1
-appVersion: "v1.3.1"
+appVersion: "v1.2.0"
 home: https://garagehq.deuxfleurs.fr/
 icon: https://garagehq.deuxfleurs.fr/images/garage-logo.svg
 

script/helm/garage/README.md

@@ -1,6 +1,6 @@
 # garage
 
-![Version: 0.7.3](https://img.shields.io/badge/Version-0.7.3-informational?style=flat-square) ![Type: application](https://img.shields.io/badge/Type-application-informational?style=flat-square) ![AppVersion: v1.3.1](https://img.shields.io/badge/AppVersion-v1.3.1-informational?style=flat-square)
+![Version: 0.7.1](https://img.shields.io/badge/Version-0.7.1-informational?style=flat-square) ![Type: application](https://img.shields.io/badge/Type-application-informational?style=flat-square) ![AppVersion: v1.2.0](https://img.shields.io/badge/AppVersion-v1.2.0-informational?style=flat-square)
 
 S3-compatible object store for small self-hosted geo-distributed deployments
 

script/helm/garage/templates/service.yaml

@@ -4,10 +4,6 @@ metadata:
   name: {{ include "garage.fullname" . }}
   labels:
     {{- include "garage.labels" . | nindent 4 }}
-  {{- with .Values.service.annotations }}
-  annotations:
-    {{- toYaml . | nindent 4 }}
-  {{- end }}
 spec:
   type: {{ .Values.service.type }}
   ports:
@@ -41,4 +37,4 @@ spec:
       name: metrics
   selector:
     {{- include "garage.selectorLabels" . | nindent 4 }}
-{{- end }}
+{{- end }}