Rename Drip-Wall to Drip-Planters in front-irrigation.

prod/aq-basement.yaml

@@ -1,14 +1,96 @@
 substitutions:
   node_name: aq-basement
   node_friendly_name: Basement
-  http_timeout: 3s
+  node_area: Basement
 
 packages:
-  - !include ../common/esp32-idf.yaml
-  - !include ../common/airgradient_one_v9.yaml
-  - !include ../common/wifi-influxdb.yaml
-  - !include ../common/wifi-km6g-iot.yaml
-  - !include ../common/base-influxdb.yaml
-  - !include ../common/http-request-idf.yaml
-  - !include ../common/sntp-time.yaml
-  - !include ../common/influxdb.yaml
+  - !include
+    file: framework/esp32_idf.yaml
+
+  - !include
+    file: unit/airgradient_one_v9.yaml
+
+  - !include
+    file: domain/logger/disabled.yaml
+
+  - !include
+    file: domain/base.yaml
+  - !include
+    file: domain/influxdb_v2_oss/base.yaml
+
+  - !include
+    file: domain/network/wifi.yaml
+  - !include
+    file: domain/influxdb_v2_oss/wifi.yaml
+  - !include
+    file: domain/network/wifi_km6g_iot.yaml
+
+  - !include
+    file: domain/time/sntp.yaml
+
+  - !include
+    file: domain/http_request_idf.yaml
+
+  - !include
+    file: domain/influxdb_v2_oss/core.yaml
+
+  - !include
+    file: domain/sensor/home_assistant.yaml
+    vars:
+      id: outdoor_temperature
+      entity: sensor.outdoor_temperature_a
+
+  - !include
+    file: domain/sensor/home_assistant.yaml
+    vars:
+      id: outdoor_humidity
+      entity: sensor.outdoor_humidity_a
+
+sensor:
+  - id: temperature_f
+    platform: copy
+    source_id: temperature_c
+    unit_of_measurement: "°F"
+    filters:
+      - multiply: 1.8
+      - offset: 32.0
+
+font:
+  - id: sans_14
+    file: ../fonts/LiberationSans-Regular.ttf
+    size: 14
+    glyphs: '!"%()+=,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz/µ³'
+
+display:
+  - id: !extend _display
+    pages:
+      - lambda: |-
+          it.print(0, 0, id(sans_14), "Temp:");
+          it.printf(128, 0, id(sans_14), TextAlign::TOP_RIGHT, "%.1f°F", id(temperature_f).state);
+          it.print(0, 16, id(sans_14), "Humidity:");
+          it.printf(128, 16, id(sans_14), TextAlign::TOP_RIGHT, "%.1f%%", id(humidity).state);
+          it.print(0, 32, id(sans_14), "CO2:");
+          it.printf(128, 32, id(sans_14), TextAlign::TOP_RIGHT, "%.0f ppm", id(co2).state);
+          it.print(0, 48, id(sans_14), "PM2.5:");
+          it.printf(128, 48, id(sans_14), TextAlign::TOP_RIGHT, "%.0f µg/m³", id(pm_2_5).state);
+      - lambda: |-
+          it.print(0, 0, id(sans_14), "Temp:");
+          it.printf(128, 0, id(sans_14), TextAlign::TOP_RIGHT, "%.1f°F", id(temperature_f).state);
+          it.print(0, 16, id(sans_14), "Humidity:");
+          it.printf(128, 16, id(sans_14), TextAlign::TOP_RIGHT, "%.1f%%", id(humidity).state);
+          it.print(0, 32, id(sans_14), "VOC:");
+          it.printf(128, 32, id(sans_14), TextAlign::TOP_RIGHT, "%.0f", id(voc).state);
+          it.print(0, 48, id(sans_14), "NOx:");
+          it.printf(128, 48, id(sans_14), TextAlign::TOP_RIGHT, "%.0f", id(nox).state);
+      - lambda: |-
+          it.print(64, 0, id(sans_14), TextAlign::TOP_CENTER, "Outdoor");
+          it.print(0, 16, id(sans_14), "Temp:");
+          it.printf(128, 16, id(sans_14), TextAlign::TOP_RIGHT, "%.1f°F", id(outdoor_temperature).state);
+          it.print(0, 32, id(sans_14), "Humidity:");
+          it.printf(128, 32, id(sans_14), TextAlign::TOP_RIGHT, "%.1f%%", id(outdoor_humidity).state);
+
+interval:
+  - interval: 5s
+    then:
+      - display.page.show_next: _display
+      - component.update: _display

prod/front-irrigation.yaml

@@ -1,9 +1,9 @@
 # Wiring configuration
 
-# Drip (Planters) -
+# Drip (Planters) - Green
 # Sprinklers (Lower) - Red
 # Sprinklers (Upper) - Blue
-# Unused -
+# Unused - Yellow
 # Common - White
 
 substitutions:
@@ -58,7 +58,7 @@ packages:
     vars:
       irrigation_area_name: Front Yard
       zone_1_switch: relay3
-      zone_1_name: Wall
+      zone_1_name: Planters
       zone_1_duration: 15
       zone_2_switch: relay4
       zone_2_name: Unused

prod/hpwh.yaml

@@ -33,6 +33,7 @@ packages:
       tx_pin: GPIO4
       rx_pin: GPIO36
       baud_rate: 38400
+      parity: NONE
 
 external_components:
   - source: